Click image to view full size image
:: GMT Linear Motion System :: Rigidity Coupling :: RAB
Product pictures-RAB
Product Features
1. Higher torque and torsional stiffness.
2. Good shock load absorption.
3. Zero backlash.
4. Low inertia.
5. Maintenance free, oil and chemical resistant
6. Identical clockwise and anti-clockwise rotational characteristic.
Product Specification
Product Options
Product introduction-Coupling
- Coupling is a mechanism device, connecting transmission between two shafts and transmit ting safety torque.
- Coupling divided into "Flexible type" and "Rigidity type".
- To apply flexible couplings timing in case of power transmission, two shafts are not easy to set in alignment, or to simplify two shafts installation. It contains shock buffer to absorb parallelism, deflection, axial displacement, deviation improvement, and improvement of traditional transmission power, so few deviation would not cause any unusual situation on bear so few deviation would not cause any unusual situation on bear.
- Rigidity coupling is an unit causing non-eccentric, non-deflection, and make two connected shafts fixed in one unit. Users must do the best to have motor running and axis of load in alignment due to high requirement of concentricity, also means of axis has to be calibrated strictly; otherwise, the rotating shaft would be broken caused by mechanism fatigue, also the bearing would be thermal abrasion due to eccentric load, those were brought by continuous vibration of the axis during long term running of the motor. The advantage of rigidity couplings is to transmit transmission torque precisely.
Overseas Exhibitions
Factory view
ISO 9001:2008 certificate
Rigid Coupling - 2 pieces type, GMT-RAB
